Diferencias

Muestra las diferencias entre dos versiones de la página.

--- redes:switches:3com [2016/07/06 14:25] – [Ejemplo de pantalla de booteo] cayu
+++ redes:switches:3com [Fecha desconocida] (actual) – borrado - editor externo (Fecha desconocida) 127.0.0.1
@@ Línea 1: / Línea 1: @@
-====== 3COM ======
-===== 5500 Series =====
-==== Configuración Minicom ====
-<code ini>
-pu port             /dev/ttyUSB0
-pu baudrate         19200
-pu bits             8
-pu parity           N
-pu stopbits         1
-pu hasdcd           No
-pu rtscts           No
-pu xonxoff          No
-</code>
-==== Pantalla de booteo ====
-<code>
-Starting......
-      ******************************************************************
-      *                                                                *
-      *   SuperStack 4 Switch 5500G-EI 24-Port BOOTROM, Version 4.03   *
-      *                                                                *
-      ******************************************************************
-      Copyright (c) 2004-2007 3Com Corporation and its licensors.
-      Creation date   : Jan 23 2007, 11:19:21
-      CPU type        : BCM1122
-      CPU Clock Speed : 400MHz
-      BUS Clock Speed : 33MHz
-      Memory Size     : 128MB
-      Mac Address     : 0022573c6480
-Press Ctrl-B to enter Boot Menu... 0
-Auto-booting...
-Decompress Image....................................................................!
-Starting at 0x80020000...
-Press Ctrl-B to enter Boot Menu... 1
-password:
-  BOOT  MENU
-. Download application file to flash
-. Select application file to boot
-. Display all files in flash
-. Delete file from flash
-. Modify bootrom password
-. Enter bootrom upgrade menu
-. Skip current configuration file
-. Set bootrom password recovery
-. Set switch startup mode
-. Reboot
-Enter your choice(0-9):
-</code>
-==== Configuración ====
-=== Resetear configuración ===
-The following commands are used to return the switch to factory default settings:
-**<5500G-EI>reset saved-configuration** – This command will remove the user saved configuration file. To see which file will be deleted, enter display startup .
-**[5500G-EI]change self-unit to auto-numbering** – This command will remove any saved Switch unit number (enter display ftm topo to see which switches in a stack are configured with a manual unit number, these are marked with priority 5, automatic numbered switches are marked with a priority of 10).
-**[5500G-SI]rsa local-key-pair destroy** – This command will remove any local rsa keys used for SSH access.
-**<5500G-SI>startup bootrom-access enable** – This command will re-enable access to the bootrom.
-From the boot menu, the following commands may be used to select the appropriate defaults: **Modify bootrom password** – Factory default is no bootrom password. **Skip current configuration file** – Factory default is process configuration file. **Set bootrom password recovery** – Factory default is enable bootrom password recovery. **Set switch startup mode** – Factory default is fast startup.
-**<5500G-EI> undo clock timezone** – This command will return the timezone to the factory default UTC timezone. Enter display clock to see what timezone is configured.
-Referencia: http://serverfault.com/questions/297967/how-do-i-factory-reset-a-3com-5500g-ei