Diferencias

Muestra las diferencias entre dos versiones de la página.

--- redes:switches:3com [2016/07/05 17:51] – cayu
+++ redes:switches:3com [2016/07/06 14:25] – [Ejemplo de pantalla de booteo] cayu
@@ Línea 12: / Línea 12: @@
 pu xonxoff          No
 </code>
-==== Ejemplo de pantalla de booteo ====
+==== Pantalla de booteo ====
 <code>
 Starting......
@@ Línea 34: / Línea 34: @@
 Press Ctrl-B to enter Boot Menu... 0
 Auto-booting...
-Decompress Image..............................................................................................................................................!
+Decompress Image....................................................................!
 Starting at 0x80020000...
+Press Ctrl-B to enter Boot Menu... 1
+password:
+  BOOT  MENU
+. Download application file to flash
+. Select application file to boot
+. Display all files in flash
+. Delete file from flash
+. Modify bootrom password
+. Enter bootrom upgrade menu
+. Skip current configuration file
+. Set bootrom password recovery
+. Set switch startup mode
+. Reboot
+Enter your choice(0-9):
 </code>
+==== Configuración ====
+=== Resetear configuración ===
+The following commands are used to return the switch to factory default settings:
+**<5500G-EI>reset saved-configuration** – This command will remove the user saved configuration file. To see which file will be deleted, enter display startup .
+**[5500G-EI]change self-unit to auto-numbering** – This command will remove any saved Switch unit number (enter display ftm topo to see which switches in a stack are configured with a manual unit number, these are marked with priority 5, automatic numbered switches are marked with a priority of 10).
+**[5500G-SI]rsa local-key-pair destroy** – This command will remove any local rsa keys used for SSH access.
+**<5500G-SI>startup bootrom-access enable** – This command will re-enable access to the bootrom.
+From the boot menu, the following commands may be used to select the appropriate defaults: **Modify bootrom password** – Factory default is no bootrom password. **Skip current configuration file** – Factory default is process configuration file. **Set bootrom password recovery** – Factory default is enable bootrom password recovery. **Set switch startup mode** – Factory default is fast startup.
+**<5500G-EI> undo clock timezone** – This command will return the timezone to the factory default UTC timezone. Enter display clock to see what timezone is configured.
+Referencia: http://serverfault.com/questions/297967/how-do-i-factory-reset-a-3com-5500g-ei