iDrac Dell

IPMI es un estándar que encontramos en el hardware de muchos servidores, se trata de un chipset que permite obtener información del estado de diferentes componentes hardware, temperaturas, voltajes, etc. Este estándar lo conforman empresas como HP, Dell e Intel.

Ejemplo de como activarlo desde el SSH de iDrac 6 

racadm config -g cfgIpmiLan -o cfgIpmiLanEnable 1
racadm config -g cfgIpmiLan -o cfgIpmiLanPrivilegeLimit <nivel>

donde <nivel> es uno de los siguientes valores:

Como ver la configuración actual 

racadm getconfig -g cfgIpmiLan

http://support.dell.com/support/edocs/software/smdrac3/idrac/idrac1.11/sp/ug/chap09.htm?~file=/software/smdrac3/idrac/idrac1.11/sp/ug/chap09.htm&~f=

Como obtener los datos desde nuestro sistema operativo 

ipmitool -I lan -H 10.0.0.10 -U user -P pass chassis status
ipmitool -I lan -H 10.0.0.10 -U user -P pass sdr list
ipmitool -I lan -H 10.0.0.10 -U user -P pass sdr type "Power Supply"

Status           | 64h | ok  | 10.1 | Presence detected
Status           | 65h | ok  | 10.2 | Presence detected, Power Supply AC lost
Status           | 66h | ok  | 10.3 | Presence detected
Status           | 67h | ok  | 10.4 | Presence detected
PS Redundancy    | 74h | ok  |  7.1 | Redundancy Degraded
/usr/sbin/ipmimonitoring -h 10.15.3.107 --config-file /etc/freeipmi.conf -u user -p pass
Record_IDSensor NameSensor GroupMonitoring StatusSensor UnitsSensor Reading
12 Ambient Temp Temperature Nominal C 25.000000
22 CMOS Battery Battery Nominal N/A 'OK'
24 VCORE PG Voltage Nominal N/A 'State Deasserted'
25 VCORE PG Voltage Nominal N/A 'State Deasserted'
26 VCORE Voltage Nominal N/A 'State Deasserted'
27 VCORE Voltage Nominal N/A 'State Deasserted'
28 VCACHE PG Voltage Nominal N/A 'State Deasserted'
29 VCACHE PG Voltage Nominal N/A 'State Deasserted'
30 VCACHE Voltage Nominal N/A 'State Deasserted'
31 VCACHE Voltage Nominal N/A 'State Deasserted'
32 VIO PG Voltage Nominal N/A 'State Deasserted'
33 VIO PG Voltage Nominal N/A 'State Deasserted'
34 CPU 1.8 PLL PG Voltage Nominal N/A 'State Deasserted'
35 8V Rear PG Voltage Nominal N/A 'State Deasserted'
36 8V Front PG Voltage Nominal N/A 'State Deasserted'
37 5V Rear PG Voltage Nominal N/A 'State Deasserted'
38 5V Front PG Voltage Nominal N/A 'State Deasserted'
39 3.3V PG Voltage Nominal N/A 'State Deasserted'
40 1.8V PG Voltage Nominal N/A 'State Deasserted'
41 1.5V PG Voltage Nominal N/A 'State Deasserted'
42 1.1V PG Voltage Nominal N/A 'State Deasserted'
43 0.9V PG Voltage Nominal N/A 'State Deasserted'
44 Mem VR PG Voltage Nominal N/A 'State Deasserted'
45 Mem VR PG Voltage Nominal N/A 'State Deasserted'
46 Mem VR PG Voltage Nominal N/A 'State Deasserted'
47 Mem VR PG Voltage Nominal N/A 'State Deasserted'
48 Mem VR PG Voltage Nominal N/A 'State Deasserted'
49 Mem VR PG Voltage Nominal N/A 'State Deasserted'
50 Mem VR PG Voltage Nominal N/A 'State Deasserted'
51 Mem VR PG Voltage Nominal N/A 'State Deasserted'
52 VR PG Voltage Nominal N/A 'State Deasserted'
53 VR1 PG Voltage Nominal N/A 'State Deasserted'
54 VR2 PG Voltage Nominal N/A 'State Deasserted'
58 Heatsink Pres Entity Presence Nominal N/A 'Entity Present'
59 iDRAC6 Ent Pres Entity Presence Nominal N/A 'Entity Present'
60 USB Cable Pres Entity Presence Nominal N/A 'Entity Present'
61 Stor Adapt Pres Entity Presence Nominal N/A 'Entity Present'
62 PCIe Riser Pres Entity Presence Critical N/A 'Entity Absent'
63 IO Riser Pres Entity Presence Nominal N/A 'OK'
64 FAN 1 RPM Fan Nominal RPM 2400.000000
65 FAN 2 RPM Fan Nominal RPM 2400.000000
66 FAN 3 RPM Fan Nominal RPM 2400.000000
67 FAN 4 RPM Fan Nominal RPM 2760.000000
68 FAN 5 RPM Fan Nominal RPM 2640.000000
69 FAN 6 RPM Fan Nominal RPM 2640.000000
74 Presence Entity Presence Nominal N/A 'Entity Present'
75 Presence Entity Presence Nominal N/A 'Entity Present'
76 Presence Entity Presence Nominal N/A 'Entity Present'
77 Presence Entity Presence Nominal N/A 'Entity Present'
78 Presence Entity Presence Nominal N/A 'Entity Present'
79 Presence Entity Presence Nominal N/A 'Entity Present'
80 Presence Entity Presence Nominal N/A 'Entity Present'
81 Presence Entity Presence Nominal N/A 'Entity Present'
82 Presence Entity Presence Nominal N/A 'Entity Present'
83 Status Processor Nominal N/A 'Processor Presence detected'
84 Status Processor Nominal N/A 'Processor Presence detected'
85 Status Processor Nominal N/A 'Processor Presence detected'
86 Status Processor Nominal N/A 'Processor Presence detected'
87 Status Power Supply Nominal N/A 'Presence detected'
88 Status Power Supply Nominal N/A 'Presence detected'
89 Status Power Supply Nominal N/A 'Presence detected'
90 Status Power Supply Nominal N/A 'Presence detected'
91 Current Current Nominal A 0.800000
92 Current Current Nominal A 0.880000
93 Current Current Nominal A 0.680000
94 Current Current Nominal A 0.800000
95 Voltage Voltage Nominal V 222.000000
96 Voltage Voltage Nominal V 224.000000
97 Voltage Voltage Nominal V 224.000000
98 Voltage Voltage Nominal V 222.000000
99 Riser Config Cable/Interconnect Nominal N/A 'Cable/Interconnect is connected'
100 OS Watchdog Watchdog 2 Nominal N/A 'OK'
102 Intrusion Physical Security Nominal N/A 'OK'
103 PS Redundancy Power Supply Nominal N/A 'Fully Redundant'
104 Fan Redundancy Fan Nominal N/A 'Fully Redundant'
105 System Level Current Nominal W 700.000000
107 Drive Drive Slot Nominal N/A 'Drive Presence'
109 Cable SAS A Cable/Interconnect Nominal N/A 'Cable/Interconnect is connected'

Si queremos elegir mostrar solo uno de los grupos deberemos agregar a la linea de comandos la opcion -g y el número -g 103.

Record_IDSensor NameSensor GroupMonitoring StatusSensor UnitsSensor Reading
103 PS Redundancy Power Supply Nominal N/A 'Fully Redundant'

Ejemplo consultar el Voltage y separalo en ; 

ipmimonitoring  -h 10.1.1.7 --config-file /usr/local/nagios/etc/ipmi/freeipmi-esxi.conf --quiet-cache --sdr-cache-recreate -s 95,96,97,98 -g Voltage |tail -n 4 | cut -d "|" -f 6    | sed -e 's/^[ \t]*/Voltage=/' | sed ':a;N;$!ba;s/\n/ /g' | sed -e 's/  /;/g'| sed -e 's/^[ \t]*//' 
Voltage=218.000000;Voltage=220.000000;Voltage=218.000000;Voltage=218.000000